Tips for Inspecting Your Vehicle’s Driveline

If you don’t know what a driveline is it’s a component that it transfers torque between the engine transmission and the rear axle, which in turn sends it to the tyres. A great driveline does this with great efficiency.

If your car experiences a driveline failure, you won’t be driving it until it is repaired. This can be a real hassle if you have to drive to work every day and can’t alternative transport.

In business operations like the transport of goods especially, driveline health is very important. If just one truck is experiencing a driveline failure, it can end up costing the company thousands of company in terms of vehicle reparation costs. The truck could be out of service for several days, meaning that productivity will take a hit as well and you’ll end up suffering greater losses.

 Prevention is the better than the cure. Hence, it is advisable that you perform periodic inspection of your driveline so that you’re aware of the warning signs. Here are some tips to help you:

Performing Periodic Inspections

Periodic inspections are particularly important for vehicles like trucks that are used for industrial operations. While drivelines typically last for a long time, regularly heavy exertion may cause the components to be worn out quicker. Therefore it is crucial that driveline components like splints and joints are checked for looseness and damage.

Here are a few tips for performing a proper inspection:

  • Carry a powerful light source with so that you can see everything clearly.
  • Pay attention to the centre bearings. These can wear out pretty fast if there are movements in the bearing assembly.
  • If necessary, be prepared to grease components like the slip yoke that form an important part of the driveline system.
  • Write down the correct specs of any components that need to be replaced. If you get any wrong, you will just end up wasting a lot of money.

If you’re not knowledgeable when it comes to driveshift components, we recommend you leave the inspections to professionals like GJ Drivelines, who have a ton of experience.

Avoiding Oversights

Sometimes even the simplest oversights can leave you ignorant of an impending driveline failure. Hence here are few things to pay extra attention to:

Slip Yoke Shaft

Check for signs of wear by simply checking whether it moves properly. All you need to do is force it up and down a few times.

Type of Grease used

We recommend that you use only synthetic grease as it works better on all kinds of joints. In comparison, standard ones can quickly become ineffective leaving you with a false sense of security until the driveline breaks down unexpectedly.


Loose fasteners at crucial locations like the centre bearing, axles and transmission are sometimes a cause of driveline failure. Therefore make sure you don’t overlook the fasteners during your periodic inspections.

Being Aware of the Symptoms

Being ignorant of warning signs can end up being costly. If you don’t know what symptoms to look out for how can you tell that something is wrong? Here are a few common ones:

  • Loose fasteners
  • Movement in the bearing assembly
  • The lack of weld balance weights
  • Corrosion on fasteners

To sum up, it’s better to periodically inspect driveline components rather than put up with the cost of a failure. Follow the best practices described in this article and should have no trouble maintaining a healthy driveline.

Leave a Comment

Your email address will not be published.